Analog Devices Inc. ADP190ACBZ-R7

Lifecycle Status

PRODUCTION (Last Updated: 1 month ago)

Factory Lead Time

8 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

4-WFBGA, WLCSP

Number of Pins

4

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e1

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

4

ECCN Code

EAR99

Resistance

160mOhm

Terminal Finish

TIN SILVER COPPER

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

7.2μW

Terminal Position

BOTTOM

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

BALL

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

1.8V

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

ADP190

Pin Count

a count of all of the component leads (or pins)

4

Number of Outputs

1

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Output Type

P-Channel

Max Output Current

The maximum current that can be supplied to the load.

500mA

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

3.6V

Interface

On/Off

Operating Supply Current

2μA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

500mA

Output Configuration

High Side

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

7.2μW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

500mA

Voltage - Supply (Vcc/Vdd)

Not Required

Max Supply Current

500mA

Input Type

Non-Inverting

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Min Input Voltage

1.1V

Max Input Voltage

3.6V

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

3.6V

Ratio - Input:Output

1:1

Voltage - Load

1.1V~3.6V

Driver Number of Bits

1

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

5 μs

Rds On (Typ)

80m Ω

Drain to Source Resistance

80mOhm

Built-in Protections

TRANSIENT

Features

Slew Rate Controlled

Height

430μm

Length

800μm

Width

800μm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead