Analog Devices Inc. AD5425YRMZ

Lifecycle Status

PRODUCTION (Last Updated: 3 weeks ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mounting Type

Surface Mount

Package / Case

10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

10

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

10

ECCN Code

EAR99

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

25μW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

2.5V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

AD5425

Pin Count

a count of all of the component leads (or pins)

10

Output Type

Current - Unbuffered

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Interface

SPI, Serial

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.5V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

400nA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

2.2μW

Number of Bits

8

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

20V

Min Input Voltage

-10V

Architecture

R-2R

Max Input Voltage

10V

Converter Type

D/A CONVERTER

Reference Type

a code object that is not stored directly where it is created, but that acts as a kind of pointer to a value stored elsewhere.

External

Data Interface

A Data Interface in EDQ is a template of a set of attributes representing a given entity, used to create processes that read from, or write to, interfaces rather than directly from or to sources or targets of data.

SPI, DSP

Differential Output

a differential output voltage in electronics is the difference between the values of two AC voltages, 180° out of phase, present at the output terminals of an amplifier when you apply a differential input voltage to the input terminals of an amplifier.

Yes

Resolution

1 B

Sampling Rate

often described in the context of signal processing as the number of samples per time.

2.47 Msps

Voltage - Supply, Analog

2.5V~5.5V

Min Output Voltage

0V

Voltage - Supply, Digital

2.5V~5.5V

Settling Time

In control theory the settling time of a dynamical system such as an amplifier or other output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band.

160ns

Linearity Error-Max (EL)

0.0977%

Integral Nonlinearity (INL)

0.25 LSB

Input Bit Code

BINARY

Number of Converters

1

Conversion Rate

the number of conversions divided by the total number of visitors.

2.47 Msps

INL/DNL (LSB)

±0.25 (Max), ±0.5 (Max)

Height

850μm

Length

3mm

Width

3mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead