Analog Devices Inc. AD5362BSTZ

Lifecycle Status

PRODUCTION (Last Updated: 1 month ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mounting Type

Surface Mount

Package / Case

52-LQFP

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

52

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tray

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

52

Termination

SMD/SMT

ECCN Code

EAR99

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

209mW

Terminal Position

QUAD

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

15V

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

AD5362

Pin Count

a count of all of the component leads (or pins)

52

Output Type

Voltage - Buffered

Polarity

Bipolar, Unipolar

Interface

SPI, Serial

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

16.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

8V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

8.5mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

209mW

Number of Bits

16

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

20V

Min Input Voltage

2V

Slew Rate

the maximum rate of output voltage change per unit time.

1 V/μs

Architecture

String DAC

Max Input Voltage

5V

Converter Type

D/A CONVERTER

Reference Type

a code object that is not stored directly where it is created, but that acts as a kind of pointer to a value stored elsewhere.

External

Data Interface

A Data Interface in EDQ is a template of a set of attributes representing a given entity, used to create processes that read from, or write to, interfaces rather than directly from or to sources or targets of data.

SPI, DSP

Differential Output

a differential output voltage in electronics is the difference between the values of two AC voltages, 180° out of phase, present at the output terminals of an amplifier when you apply a differential input voltage to the input terminals of an amplifier.

No

Resolution

2 B

Sampling Rate

often described in the context of signal processing as the number of samples per time.

540 ksps

Voltage - Supply, Analog

8V~16.5V -4.5V~16.5V

Min Output Voltage

8V

Voltage - Supply, Digital

2.5V~5.5V

Settling Time

In control theory the settling time of a dynamical system such as an amplifier or other output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band.

30μs

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

16.5V

Linearity Error-Max (EL)

0.0015%

Integral Nonlinearity (INL)

4 LSB

Input Bit Code

2'S COMPLEMENT BINARY

Dual Supply Voltage

15V

Number of Converters

8

INL/DNL (LSB)

±4 (Max), ±1 (Max)

Negative Supply Voltage-Nom

-15V

Height

1.4mm

Length

10mm

Width

10mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead