XC7Z030-2FBG484I

AMD XC7Z030-2FBG484I

Part No:

XC7Z030-2FBG484I

Manufacturer:

AMD

Datasheet:

-

Package:

484-BBGA, FCBGA

AINNX NO:

33355534-XC7Z030-2FBG484I

Description:

MPU Zynq-7000 Thumb-2 32-Bit 733MHz 1.2V/3.3V 484-Pin FCBGA

Products specifications
  • Package / Case
    484-BBGA, FCBGA
  • Supplier Device Package
    484-FCBGA (23x23)
  • Instruction Set Architecture
    Thumb-2
  • I/O Voltage
    1.2, 3.3 V
  • Supplier Package
    FCBGA
  • Number of CPU Cores
    2
  • Mounting
    Surface Mount
  • Number of I/Os
    130
  • Package
    Tray
  • Base Product Number
    XC7Z030
  • Mfr
    AMD
  • Product Status
    Active
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40 to 100 °C
  • Series
    Zynq®-7000
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    200 ppm/K
  • Resistance
    20 Ohm
  • Power Rating
    0.2 W
  • Resistor Type
    Pulse Proof, High Power
  • Pin Count

    a count of all of the component leads (or pins)

    484
  • Operating Supply Voltage

    The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

    5.5, 3 V
  • Speed
    800MHz
  • RAM Size
    256KB
  • Core Processor
    Dual ARM® Cortex®-A9 MPCore™ with CoreSight™
  • Peripherals
    DMA
  • Connectivity
    CANbus, EBI/EMI, Ethernet, I²C, MMC/SD/SDIO, SPI, UART/USART, USB OTG
  • Architecture
    MCU, FPGA
  • Data Bus Width
    32 Bit
  • Resistance Tolerance

    Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

    5
  • Primary Attributes
    Kintex™-7 FPGA, 125K Logic Cells
  • Flash Size
    -
  • Device Core

    Used in casting and moulding processes to produce internal cavities and reentrant angles (an interior angle that is greater than 18°).

    ARM Cortex A9
0 Similar Products Remaining