Advanced Linear Devices Inc. ALD4303PBL

Factory Lead Time

8 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

14-DIP (0.300, 7.62mm)

Number of Pins

14

Supplier Device Package

14-PDIP

Number of Elements

4

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~70°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2005

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Type

General Purpose

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

70°C

Min Operating Temperature

0°C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

600mW

Output Type

CMOS, NMOS, Open-Drain, TTL

Number of Channels

4

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

12V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

3V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

90μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

60mA

Max Supply Current

90μA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

90μA

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

6.5 μs

Voltage - Supply, Single/Dual (±)

3V~10V ±1.5V~5V

Output Current per Channel

60mA

Input Offset Voltage (Vos)

10mV

Voltage Gain

100dB

Max Input Current

30pA

Input Bias Current

1nA

Current - Quiescent (Max)

90μA

Voltage - Input Offset (Max)

10mV @ 5V

Current - Input Bias (Max)

30pA @ 5V

Current - Output (Typ)

60mA @ 5V

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant