Advanced Linear Devices Inc. ALD2331ASAL

Factory Lead Time

8 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Number of Elements

2

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~70°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

EPAD®

Published

2010

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Type

General Purpose

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

600mW

Reach Compliance Code

unknown

Pin Count

a count of all of the component leads (or pins)

8

Output Type

CMOS, NMOS, Open-Drain, TTL

Number of Channels

3

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

180μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

50mA

Max Supply Current

180μA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

600 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

180μA

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

1.1 μs

Common Mode Rejection Ratio

75 dB

Voltage - Supply, Single/Dual (±)

3V~10V ±1.5V~5V

Input Offset Voltage (Vos)

500μV

Voltage Gain

103.52dB

Power Supply Rejection Ratio (PSRR)

75dB

Input Bias Current

20pA

Voltage - Input Offset (Max)

0.5mV @ 5V

Current - Input Bias (Max)

20pA @ 5V

CMRR, PSRR (Typ)

80dB CMRR, 75dB PSRR

Current - Output (Typ)

50mA @ 5V

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant