Adesto Technologies AT45DB321E-SHD-T

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Mount

Surface Mount

Number of Pins

8

Number of Terminals

8

Manufacturer Part Number

AT45DB321E-SHD-T

Rohs Code

Yes

Part Life Cycle Code

Obsolete

Ihs Manufacturer

ADESTO TECHNOLOGIES CORP

Part Package Code

SOIC

Package Description

SOP, SOP8,.3

Risk Rank

5.65

Clock Frequency-Max (fCLK)

85 MHz

Moisture Sensitivity Levels

1

Number of Words

33554432 words

Number of Words Code

32000000

Operating Temperature-Max

85 °C

Operating Temperature-Min

-40 °C

Package Body Material

PLASTIC/EPOXY

Package Code

SOP

Package Equivalence Code

SOP8,.3

Package Shape

RECTANGULAR

Package Style

SMALL OUTLINE

Supply Voltage-Nom (Vsup)

3 V

Reflow Temperature-Max (s)

NOT SPECIFIED

RoHS

Compliant

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel

JESD-609 Code

e4

Type

NOR TYPE

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85 °C

Min Operating Temperature

-40 °C

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

1.27 mm

Reach Compliance Code

compliant

Pin Count

a count of all of the component leads (or pins)

8

JESD-30 Code

R-PDSO-G8

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

3.3 V

Supply Voltage-Max (Vsup)

3.6 V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3/3.3 V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

INDUSTRIAL

Supply Voltage-Min (Vsup)

2.5 V

Interface

SPI, Serial

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

3.6 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.5 V

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

SYNCHRONOUS

Supply Current-Max

0.026 mA

Access Time

6 ns

Organization

32MX1

Seated Height-Max

2.16 mm

Memory Width

1

Address Bus Width

A computer system has an address bus with 8 parallel lines. This means that the address bus width is 8 bits.

22 b

Density

32 Mb

Standby Current-Max

0.00001 A

Memory Density

33554432 bit

Parallel/Serial

SERIAL

Memory IC Type

FLASH

Programming Voltage

A special high-voltage supply that supplies the potential and energy for altering the state of certain nonvolatile memory arrays. On some devices, the presence of VPP also acts as a program enable signal (P).

2.7 V

Serial Bus Type

SPI

Endurance

100000 Write/Erase Cycles

Data Retention Time-Min

20

Write Protection

HARDWARE/SOFTWARE

Page Size

512 B

Length

5.29 mm

Width

5.24 mm