Walsin WA04Y680JTL

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Silver

Mount

Panel, Through Hole

Mounting Type

Surface Mount

Package / Case

0404 (1010 Metric), Concave

Number of Pins

4

Supplier Device Package

0404

Voltage, Rating

300 V

RoHS

Compliant

Package

Tape & Reel (TR)

Mfr

Walsin Technology Corporation

Product Status

Active

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

WA04Y

Size / Dimension

0.039 L x 0.039 W (1.00mm x 1.00mm)

Tolerance

±5%

Termination

Solder

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±200ppm/°C

Connector Type

Receptacle

Number of Positions

6

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

100 °C

Min Operating Temperature

-40 °C

Applications

-

Fastening Type

There are 5 Main Types of Fastening Type: Screws, Nails, Bolts, Anchors, Rivets.

Threaded

Orientation

Straight

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

5 A

Number of Contacts

6

Contact Gender

Female

Number of Resistors

2

Circuit Type

There are 5 Main Types of Electric Circuit – Close Circuit, Open Circuit, Short Circuit, Series Circuit and Parallel Circuit.

Isolated

Power Per Element

63mW

Resistor-Ratio-Drift

-

Resistance (Ohms)

68

Resistor Matching Ratio

The resistor matching is done for better resistor poly arrangement and spacing(it is process dependent ),but the sheilding is used to protect critical nets from crossing noisy signals.

-

Features

Shielded

Height Seated (Max)

0.018 (0.45mm)

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

Ratings

IP40