SIP32461DB-T2-GE1

Vishay Siliconix SIP32461DB-T2-GE1

Part No:

SIP32461DB-T2-GE1

Manufacturer:

Vishay Siliconix

Datasheet:

SIP32460,61,62

Package:

4-UFBGA, CSPBGA

ROHS:

AINNX NO:

7603692-SIP32461DB-T2-GE1

Description:

Power Switch ICs - Power Distribution Slew Rate Controlled Load Switch

Products specifications
  • Factory Lead Time
    16 Weeks
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    4-UFBGA, CSPBGA
  • Number of Pins
    4
  • Turn Off Delay Time

    It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

    2 μs
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C~85°C TA
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Digi-Reel®
  • Published
    2016
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Resistance
    150mOhm
  • Max Power Dissipation

    The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

    300mW
  • Base Part Number
    SIP32461
  • Number of Outputs
    1
  • Output Type
    N-Channel
  • Operating Supply Voltage

    The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

    5.5V
  • Interface
    On/Off
  • Analog IC - Other Type
    SPST
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    4.5μA
  • Output Configuration
    High Side
  • Voltage - Supply (Vcc/Vdd)
    Not Required
  • Max Supply Current
    7μA
  • Input Type
    Non-Inverting
  • Turn On Delay Time

    Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

    130 μs
  • Switch Type

    Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

    General Purpose
  • Min Input Voltage
    1.2V
  • Max Input Voltage
    5.5V
  • Ratio - Input:Output
    1:1
  • Voltage - Load
    1.2V~5.5V
  • Fault Protection

    Protection against electric shock under. single fault conditions.

    Reverse Current
  • Rds On (Typ)
    50m Ω
  • Features
    Slew Rate Controlled
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Vishay Siliconix SIP32461DB-T2-GE1.