Vishay Siliconix DG419DY-E3

Factory Lead Time

14 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Weight

540.001716mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

145 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2016

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

Resistance

35Ohm

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

400mW

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

265

Number of Functions

1

Supply Voltage

15V

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

DG419

Pin Count

a count of all of the component leads (or pins)

8

Number of Outputs

2

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

15V

Polarity

Non-Inverting

Number of Channels

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

44V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

13V

Operating Supply Current

1nA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

1nA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

400mW

Max Supply Current

1μA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

175 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

175 ns

Number of Inputs

1

Voltage - Supply, Single/Dual (±)

12V ±15V

Supply Type

Dual, Single

Neg Supply Voltage-Nom (Vsup)

-15V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

22V

On-State Resistance (Max)

35Ohm

Min Dual Supply Voltage

7V

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

30mA

Dual Supply Voltage

15V

Multiplexer/Demultiplexer Circuit

2:1

Current - Leakage (IS(off)) (Max)

250pA

Channel Capacitance (CS(off), CD(off))

8pF 8pF

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPDT

Switch Time (Ton, Toff) (Max)

175ns, 145ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

60pC

Switching

BREAK-BEFORE-MAKE

Drain to Source Resistance

20Ohm

On-State Resistance

20Ohm

Height

1.75mm

Length

5mm

Width

4mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free