Vishay Precision Group 695D106X0050H2T

Mounting Type

Through Hole

Package / Case

3015 (7038 Metric)

Resistive Material

The resistive material is a combination of a Ceramic material and a Metal, and therefore these resistors are also referred to as Cermet. Just as with carbon film, the resistance value is adjusted by cutting a spiral pattern in the film. This can be done with an abrasive or a laser.

Cermet

Lead Free Status / RoHS Status

--

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

50V

Lifetime @ Temp.

-

Series

CT94

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 125°C

Size / Dimension

Rectangular - 0.378 L x 0.189 W x 0.189 H (9.60mm x 4.80mm x 4.80mm)

Tolerance

±10%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

--

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±250ppm/°C

Type

Conformal Coated

Resistance

20 Ohms

Power (Watts)

0.5W, 1/2W

Capacitance

10µF

Termination Style

PC Pins

ESR (Equivalent Series Resistance)

1 Ohm

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Lead Spacing

the distance between two baselines of lines of type. The word 'leading' originates from the strips of lead hand-typesetters used to use to space out lines of text evenly. The word leading has stuck, but essentially it's a typographer's term for line spacing.

-

Manufacturer Size Code

H

Adjustment Type

Side Adjustment

Number of Turns

18

Features

General Purpose

Height Seated (Max)

0.125 (3.17mm)