Vishay DG303AAK

Package / Case

SOT-25-5

Mount

Through Hole

Number of Pins

14

PSRR / Ripple Rejection - Typ

70 dB

Pd - Power Dissipation

250 mW

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+ 85 C

Minimum Operating Temperature

- 40 C

Factory Pack QuantityFactory Pack Quantity

3000

Mounting Styles

SMD/SMT

Manufacturer

Torex Semiconductor

Brand

Torex Semiconductor

Input Voltage-Max

10 V

Input Voltage-Min

2 V

RoHS

Details

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

250 ns

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Reel

Type

High Speed Voltage Regulator

Resistance

50 Ω

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125 °C

Min Operating Temperature

-55 °C

Subcategory

PMIC - Power Management ICs

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

825 mW

Number of Outputs

1 Output

Output Voltage

3 V

Output Type

Fixed

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

15 V

Number of Channels

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

36 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

13 V

Operating Supply Current

70 uA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

230 µA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

825 mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

150 mA

Max Supply Current

500 µA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

70 uA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

300 ns

Number of Inputs

4

Supply Type

Dual, Single

Dropout Voltage

Dropout voltage is the input-to-output differential voltage at which the circuit ceases to regulate against further reductions in input voltage; this point occurs when the input voltage approaches the output voltage.

200 mV

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

LDO Voltage Regulators

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

22 V

Min Dual Supply Voltage

7 V

Dual Supply Voltage

15 V

Line Regulation

Line regulation is the ability of a power supply to maintain a constant output voltage despite changes to the input voltage, with the output current drawn from the power supply remaining constant.

0.01 %/V

Load Regulation

Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

15 mV

Product

LDO Voltage Regulators

Product Category

a particular group of related products.

LDO Voltage Regulators

Output Voltage Range

The range of the voltage released by a device, such as a voltage regulator or a generator. Voltage regulators maintain constant voltage levels.

-