DG212BDJ

Vishay DG212BDJ

Part No:

DG212BDJ

Manufacturer:

Vishay

Package:

-

AINNX NO:

69817820-DG212BDJ

Description:

VISHAY SILICONIX DG212BDJ Analogue Switch, Quad Channel, SPST, 4, 85 ohm, 4.5V to 25V, 4.5V to22V, DIP, 16

Products specifications
  • Mount
    Through Hole
  • Number of Pins
    16
  • Weight
    1.627801 g
  • Case/Package
    PDIP
  • RoHS
    Compliant
  • Turn Off Delay Time

    It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

    200 ns
  • Resistance
    85 Ω
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    85 °C
  • Min Operating Temperature
    -40 °C
  • Max Power Dissipation

    The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

    470 mW
  • Number of Outputs
    4
  • Number of Channels
    4
  • Number of Circuits
    4
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    25 V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    4.5 V
  • Power Dissipation

    the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

    470 mW
  • Max Supply Current
    10 µA
  • Turn On Delay Time

    Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

    300 ns
  • Number of Inputs
    4
  • Supply Type
    Dual, Single
  • Max Dual Supply Voltage

    A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

    22 V
  • Min Dual Supply Voltage
    4.5 V
  • Drain to Source Resistance
    85 Ω
  • Height
    3.81 mm
  • Length
    21.33 mm
  • Width
    7.11 mm
  • REACH SVHC
    No SVHC
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Vishay DG212BDJ.