Vishay 534B1203JL

Package / Case

Axial

Mounting Type

Panel Mount

Supplier Device Package

Axial

Resistive Material

The resistive material is a combination of a Ceramic material and a Metal, and therefore these resistors are also referred to as Cermet. Just as with carbon film, the resistance value is adjusted by cutting a spiral pattern in the film. This can be done with an abrasive or a laser.

Wirewound

Package

Bulk

Mfr

Stackpole Electronics Inc

Product Status

Active

Factory Pack QuantityFactory Pack Quantity

10

Manufacturer

Vishay

Brand

Vishay

RoHS

Details

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

CFM

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Size / Dimension

0.067 Dia x 0.130 L (1.70mm x 3.30mm)

Tolerance

±5%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

0/ -1500ppm/°C

Resistance

1 MOhms

Composition

Carbon Film

Power (Watts)

0.25W, 1/4W

Subcategory

Potentiometers, Trimmers & Rheostats

Power Rating

2W

Termination Style

Solder Lug

Actuator Type

Slotted Shaft

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Insulation Resistance

The measurement of insulation resistance is carried out by means of a megohmmeter – high resistance range ohmmeter. A general rule-of-thumb is 10 Megohm or more.

1 GΩ

Bushing Thread

a fastener element that is inserted into an object

3/8-32

Adjustment Type

Rotary

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

Precision Potentiometers

Number of Turns

10

Taper

Linear

Built in Switch

None

Resistance Tolerance

Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

± 5%

Actuator Diameter

0.250 (6.35mm)

Rotation

3600°

Size - Body

Round - 0.875 Dia (22.22mm)

Number of Gangs

1

Resistance (Ohms)

20k

Features

Flame Retardant Coating, Safety

Product Category

a particular group of related products.

Precision Potentiometers

Shaft Diameter

6.35 mm

Product Length

39.67mm

Product Width

-

Height Seated (Max)

-

Actuator Length

0.812 (20.63mm)

Product Height

-