2918

Visaton 2918

Part No:

2918

Manufacturer:

Visaton

Datasheet:

-

Package:

HC-49/US

AINNX NO:

39131728-2918

Description:

Visaton K 64 WP 2.5 inch 6.4 cm Wideband speaker 2 W 8 Ω

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    HC-49/US
  • Mount
    External
  • Weight
    50g
  • Package
    Bulk
  • Mfr
    Suntsu Electronics, Inc.
  • Product Status
    Active
  • Recess diameter
    30.8mm
  • Max. frequency
    15000Hz
  • Min. frequency
    200Hz
  • Driver Type
    Full-range
  • RoHS
    Compliant
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    0°C ~ 70°C
  • Series
    SXTHM2
  • Size / Dimension
    0.524 L x 0.197 W (13.30mm x 5.00mm)
  • Type
    MHz Crystal
  • Color
    Black
  • Power Rating
    2 W
  • Frequency
    20 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±25ppm
  • ESR (Equivalent Series Resistance)
    30 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    12pF
  • Impedance

    In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

    8Ω
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±15ppm
  • Self Resonant Frequency

    The self resonant frequency of an inductor is the frequency at which the parasitic capacitance of the inductor resonates with the ideal inductance of the inductor resulting in an extremely high impedance. At this frequency the device looks like an open circuit.

    300 Hz
  • Height Seated (Max)
    0.177 (4.50mm)
  • REACH SVHC
    No SVHC
0 Similar Products Remaining