u-blox NINA-W132-02B

Mounting Type

Surface Mount

Package / Case

36-SMD Module

Supplier Device Package

1206

Package

Tape & Reel (TR)

Mfr

Vishay Dale

Product Status

Active

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-65°C ~ 170°C

Series

WSL-HP

Size / Dimension

0.126 L x 0.063 W (3.20mm x 1.60mm)

Tolerance

±1%

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±75ppm/°C

Resistance

47 mOhms

Composition

Metal Element

Power (Watts)

0.5W, 1/2W

Voltage - Supply

3V ~ 3.6V

Frequency

2.4GHz

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Memory Size

The memory capacity is the amount of data a device can store at any given time in its memory.

2MB Flash, 520kB SRAM

Data Rate

Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).

72Mbps

Utilized IC / Part

-

Protocol

802.11b/g/n

Power - Output

18dBm

RF Family/Standard

WiFi

Antenna Type

There are several different types of antennas in three broad categories: omni-directional, directional, and semi-directional.

Integrated, Stamped Metal

Sensitivity

-96dBm

Serial Interfaces

A serial interface is a communication interface between two digital systems that transmits data as a series of voltage pulses down a wire. Essentially, the serial interface encodes the bits of a binary number by their "temporal" location on a wire rather than their "spatial" location within a set of wires.

SPI, UART

Current - Receiving

110mA ~ 125mA

Current - Transmitting

120mA ~ 170mA

Modulation

CCK, DSSS, OFDM

Features

Automotive AEC-Q200, Current Sense, Moisture Resistant, Pulse Withstanding

Height Seated (Max)

0.035 (0.89mm)

Ratings

AEC-Q200