TT Electronics/Optek Technology OPB770TZ

Factory Lead Time

8 Weeks

Mount

Screw

Number of Pins

3

Number of Elements

1

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

10V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Series

Photologic®

Published

2006

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Connector Type

Wire

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

70°C

Min Operating Temperature

-40°C

Voltage - Rated DC

10V

Voltage - Supply

4.75V~5.25V

Output Voltage

35V

Lead Length

304.8mm

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Number of Channels

1

Output Configuration

Totem Pole

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

300mW

Forward Current

Current which flows upon application of forward voltage.

40mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

35V

Max Input Voltage

1.8V

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.8V

Sensing Distance

It is the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. (Normally, it is 70 to 80 % of the maximum operation distance.)

0.080 ~ 0.220 (2.03mm ~ 5.58mm) ADJ

Power Consumption

Power consumption is the amount of input energy (measured in watts) required for an electrical appliance to function. This is opposed to power output which is a measure of the level of performance, of a heat pump for example.

300mW

Reverse Breakdown Voltage

3V

Sensing Method

Reflective

Max Input Current

40mA

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

100μA

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

12.8mA

Input Current

40mA

Max Supply Voltage (DC)

5.25V

Connection Method

the systematic way of connecting the Power Plant (units) to the power grid.

Wire

Min Supply Voltage (DC)

4.75V

Peak Wavelength

890 nm

Reverse Voltage (DC)

3V

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free