TT Electronics/Optek Technology OPB715Z

Factory Lead Time

10 Weeks

Mount

Panel, Snap in

Number of Pins

3

Housing Material

Plastic

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Series

Photologic®

Published

1999

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

Wire

Connector Type

Wire

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-40°C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

300mW

Voltage - Supply

4.75V~5.25V

Output Voltage

35V

Number of Channels

1

Operating Supply Current

30mA

Output Configuration

Totem Pole

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

300mW

Forward Current

Current which flows upon application of forward voltage.

50mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

35V

Adjustment Type

Adjustable

Sensing Distance

It is the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. (Normally, it is 70 to 80 % of the maximum operation distance.)

0.500 (12.7mm)

Sensing Method

Reflective

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

100μA

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

16mA

Input Current

50mA

Connection Method

the systematic way of connecting the Power Plant (units) to the power grid.

Wire

Light Source

an optical transmitter that is paired with an optical receiver, both of which are connected to electrically based devices or systems.

Infrared

Width

12.7mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free