TRINAMIC Motion Control GmbH QSH4218-51-10-049-10K

Mounting Hole Spacing

The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm), so the router can be mounted in any rack that provides holes spaced at that distance.

1.220 (31.00mm)

Frame Size - NEMA

NEMA 17

Factory Pack QuantityFactory Pack Quantity

1

Base Product Number

QSH4218

Mfr

Trinamic Motion Control GmbH

CoilResistance

5 Ohms

RoHS

Details

Part # Aliases

50-0152

Unit Weight

13.227736 oz

Package

Bulk

Product Status

Active

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

5VDC

Series

QSH4218

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-20°C ~ 50°C

Size / Dimension

Square - 1.665 x 1.665 (42.30mm x 42.30mm)

Type

Hybrid

Current Rating (Amps)

1 A

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

1 A

Termination Style

Wire Leads

Approval Agency

CE

Accuracy

±5%

Coil Type

There are 2 different types of 'coil'; one has copper on it (IUD) and the other contains hormone (Mirena IUS). Both are over 99% effective at protecting against pregnancy.

Bipolar

Step Angle

the angle at which the rotor of a stepper motor moves when one pulse is applied to the input of the stator.

1.8°

Steps per Revolution

200

Torque - Holding (oz-in / mNm)

69.39 / 490

Features

Flatted Shaft

NEMA Frame Size

NEMA (National Electrical Manufacturers Association) frame size refers to mounting only and has no direct bearing on the motor body diameter. In any standard frame number designation there are either two or three numbers.

17

Rotor Inertia

68gcm²

Diameter - Shaft

0.197 (5.00mm)

Length - Shaft and Bearing

0.945 (24.00mm)