Trinamic Motion Control GmbH PM20S-020-124

Weight

0.053 lb (24 g)

Mounting Hole Spacing

The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm), so the router can be mounted in any rack that provides holes spaced at that distance.

1.220" (31.00mm)

Mfr

Trinamic Motion Control GmbH

Package

Bulk

Product Status

Obsolete

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

1.5VDC

CoilResistance

2 Ohms

Base Product Number

PM20S-020

Voltage, Rating

1.5 VDC

Minimum Holding Torque

80 N-cm

Unit Weight

0.846575 oz

Factory Pack QuantityFactory Pack Quantity

1

Manufacturer

Trinamic

Brand

Trinamic

Tradename

SpreadCycle ; CoolStep ; StealthChop ; CANopen ; StallGuard ;

RoHS

Details

Series

-

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-

Size / Dimension

Round - 0.807" Dia (20.50mm)

Type

Permanent Magnet

Subcategory

Motors & Motor Drives

Current Rating (Amps)

750 mA

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

750mA

Termination Style

Wire Leads with Connector

Approval Agency

-

Accuracy

-

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

Stepper Motors

Coil Type

There are 2 different types of 'coil'; one has copper on it (IUD) and the other contains hormone (Mirena IUS). Both are over 99% effective at protecting against pregnancy.

Bipolar

Step Angle

the angle at which the rotor of a stepper motor moves when one pulse is applied to the input of the stator.

18°

Steps per Revolution

20

Torque - Holding (oz-in / mNm)

1.1 / 7.77

Features

-

NEMA Frame Size

NEMA (National Electrical Manufacturers Association) frame size refers to mounting only and has no direct bearing on the motor body diameter. In any standard frame number designation there are either two or three numbers.

8

Rotor Inertia

-

Product Category

a particular group of related products.

Stepper Motors

Diameter - Shaft

0.059" (1.50mm)

Length - Shaft and Bearing

0.256" (6.50mm)