Toshiba TMPM330FDFG

Mount

Surface Mount

Package / Case

LQFP

Number of Pins

100

Frequency(Max)

40MHz

Memory Types

FLASH

Number of I/Os

77

Published

2010

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Number of Terminations

100

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-20°C

Terminal Position

QUAD

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Frequency

40MHz

Pin Count

a count of all of the component leads (or pins)

100

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

OTHER

Interface

I2C, UART

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

3.6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.7V

Memory Size

The memory capacity is the amount of data a device can store at any given time in its memory.

512kB

RAM Size

32kB

uPs/uCs/Peripheral ICs Type

MICROCONTROLLER, RISC

Bit Size

32

Has ADC

NO

DMA Channels

NO

Data Bus Width

32b

PWM Channels

NO

Number of Timers/Counters

2

Core Architecture

ARM

Number of ADC Channels

12

Number of I2C Channels

3

Height

1.4mm

Length

14mm

Width

14mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant