Toshiba TC7SH125FE

Package / Case

SOT-553

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Operating Temperature (Max.)

85°C

Operating Temperature (Min.)

-40°C

Published

2009

JESD-609 Code

e0

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Discontinued

Number of Terminations

5

Terminal Finish

TIN LEAD

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8542.39.00.01

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

FLAT

Number of Functions

1

Supply Voltage

3.3V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Pin Count

a count of all of the component leads (or pins)

5

JESD-30 Code

R-PDSO-F5

Polarity

Non-Inverting

Supply Voltage-Max (Vsup)

5.5V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

2/5.5V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

INDUSTRIAL

Supply Voltage-Min (Vsup)

2V

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

50pF

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

2

Number of Bits

1

Family

LV/LV-A/LVX/H

Logic Function

Buffer

Output Characteristics

3-STATE

Logic IC Type

BUS DRIVER

Max I(ol)

0.004 A

Prop. Delay@Nom-Sup

13 ns

Propagation Delay (tpd)

13 ns

Control Type

ENABLE LOW

Length

1.6mm

Height Seated (Max)

0.6mm

Width

1.2mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant