Texas Instruments TS3USB30ERSWR

Lifecycle Status

ACTIVE (Last Updated: 2 days ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mounting Type

Surface Mount

Package / Case

10-UFQFN

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

10

Weight

10.007382mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

30 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

10

Termination

SMD/SMT

ECCN Code

EAR99

Resistance

10Ohm

Applications

USB

Terminal Position

QUAD

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

3.3V

Base Part Number

TS3USB30

Pin Count

a count of all of the component leads (or pins)

10

Number of Outputs

4

Polarity

Non-Inverting

Number of Channels

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

4.3V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

3V

Analog IC - Other Type

DIFFERENTIAL MULTIPLEXER

Operating Supply Current

1μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

25 ns

Data Rate

Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).

480 Mbps

Number of Inputs

2

Supply Type

Single

On-State Resistance (Max)

10Ohm

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

64mA

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

64mA

Off-state Isolation-Nom

40 dB

On-state Resistance Match-Nom

0.35Ohm

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

DPDT

Switching

BREAK-BEFORE-MAKE

Voltage - Supply, Single (V+)

3V~4.3V

Drain to Source Resistance

10Ohm

Normal Position

NC

Features

Bi-Directional, USB 2.0

Height

550μm

Length

1.8mm

Width

1.4mm

Thickness

450μm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free