Texas Instruments TPS22913CYZVR

Lifecycle Status

ACTIVE (Last Updated: 4 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Copper, Silver, Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

4-XFBGA, DSBGA

Number of Pins

4

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

6.6 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

JESD-609 Code

e1

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

4

ECCN Code

EAR99

Resistance

80mOhm

Terminal Finish

Tin/Silver/Copper (Sn/Ag/Cu)

Terminal Position

BOTTOM

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

BALL

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

1.5V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Base Part Number

TPS22913

Pin Count

a count of all of the component leads (or pins)

4

Number of Outputs

1

Output Type

P-Channel

Max Output Current

The maximum current that can be supplied to the load.

2A

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5.5V

Interface

On/Off

Output Configuration

High Side

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

2A

Voltage - Supply (Vcc/Vdd)

Not Required

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

2μA

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

770 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Min Input Voltage

1.4V

Max Input Voltage

5.5V

Output Characteristics

OPEN-DRAIN

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

5.5V

Ratio - Input:Output

1:1

Input Characteristics

STANDARD

Voltage - Load

1.4V~5.5V

Driver Number of Bits

1

Fault Protection

Protection against electric shock under. single fault conditions.

Reverse Current, UVLO

Rds On (Typ)

60m Ω

Built-in Protections

TRANSIENT; UNDER VOLTAGE

Features

Load Discharge, Slew Rate Controlled

Height

500μm

Length

0m

Width

0m

Thickness

350μm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free