Texas Instruments TPL0102-100RUCR

Lifecycle Status

ACTIVE (Last Updated: 5 days ago)

Factory Lead Time

6 Weeks

Mounting Type

Surface Mount

Package / Case

14-XFQFN

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

14

Memory Types

Non-Volatile

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Tolerance

±20%

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

14

ECCN Code

EAR99

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

130 ppm/°C

Resistance

100kOhm

Number of Positions

256

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Voltage - Supply

2.7V~5.5V ±2.25V~2.75V

Terminal Position

QUAD

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

0.4mm

Base Part Number

TPL0102

Pin Count

a count of all of the component leads (or pins)

14

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3/5V

Configuration

Potentiometer

Interface

I2C

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2mA

Bandwidth

250 kHz

Taper

Linear

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

2.75V

Integral Nonlinearity (INL)

0.5 LSB

Min Dual Supply Voltage

2.25V

Dual Supply Voltage

2.5V

Number of Taps

256

Total Resistance

100000Ohm

Differential Nonlinearity

0.25 LSB

Resistance - Wiper (Ω) (Typ)

25

Resistor Terminal Voltage-Max

5.5V

Temperature Coefficient (Typ)

92ppm/°C

Number of DAC Channels

A DAC is a device that converts a digital, typically binary, code to an analog signal, such as a current, voltage, or electric charge. One DAC converter can have several channels. Each channel can sample an analog output from numerical values that are converted to output voltages.

2

Features

Selectable Address

Height

400μm

Length

2mm

Width

2mm

Thickness

350μm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free