Texas Instruments TLV320AIC23BPWR

Lifecycle Status

ACTIVE (Last Updated: 2 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mounting Type

Surface Mount

Package / Case

28-TSSOP (0.173, 4.40mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

28

Weight

117.508773mg

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-10°C~70°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

28

Type

Stereo Audio

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Base Part Number

TLV320AIC23

Pin Count

a count of all of the component leads (or pins)

28

Interface

2-Wire, I2C, SPI, Serial

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

3.6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

1.42V

Output Power

That power available at a specified output of a device under specified conditions of operation.

23mW

Data Interface

A Data Interface in EDQ is a template of a set of attributes representing a given entity, used to create processes that read from, or write to, interfaces rather than directly from or to sources or targets of data.

I2C, Serial

Sampling Rate

often described in the context of signal processing as the number of samples per time.

96 ksps

Voltage - Supply, Analog

2.7V~3.6V

Voltage - Supply, Digital

1.42V~3.6V

Power Consumption

Power consumption is the amount of input energy (measured in watts) required for an electrical appliance to function. This is opposed to power output which is a measure of the level of performance, of a heat pump for example.

23mW

Number of A/D Converters

2

Signal to Noise Ratio (SNR)

90 dB

Number of ADC Channels

1

Resolution (Bits)

16 b, 20 b, 24 b, 32 b

Number of Analog Inputs

3

Sigma Delta

Yes

Number of ADCs / DACs

2 / 2

Dynamic Range, ADCs / DACs (db) Typ

90 / 90

S/N Ratio, ADCs / DACs (db) Typ

90 / 100

Number of Analog Outputs

4

Height

1.2mm

Length

9.7mm

Width

4.4mm

Thickness

1mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free