Texas Instruments SN74CB3T1G125DBVR

Lifecycle Status

ACTIVE (Last Updated: 4 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

SC-74A, SOT-753

Number of Pins

5

Weight

11.198062mg

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

74CB

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

5

ECCN Code

EAR99

Type

Bus Switch

Resistance

8Ohm

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Packing Method

TR

Voltage - Supply

2.3V~3.6V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

2.5V

Base Part Number

74CB3T1G125

Pin Count

a count of all of the component leads (or pins)

5

Circuit

1 x 1:1

Supply Voltage-Max (Vsup)

3.6V

Supply Voltage-Min (Vsup)

2.3V

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

2

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

24μA

Number of Bits

1

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

250 ps

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

20μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

7.5 ns

Family

CB3T/3VT

Output Characteristics

3-STATE

Supply Type

Single

Address Bus Width

A computer system has an address bus with 8 parallel lines. This means that the address bus width is 8 bits.

1b

Output Polarity

TRUE

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

-128mA

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

128mA

Power Supply Current-Max (ICC)

0.02mA

Voltage Supply Source

A voltage source is a two-terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. However, a real-world voltage source cannot supply unlimited current. A voltage source is the dual of a current source.

Single Supply

Count Direction

BIDIRECTIONAL

Translation

N/A

Height

1.45mm

Length

2.9mm

Width

1.6mm

Thickness

1.2mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free