Texas Instruments SN65LVDS100DGK

Lifecycle Status

ACTIVE (Last Updated: 1 week ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Number of Pins

8

Weight

18.99418mg

Interface Standards

EIA-644-A; TIA-644-A

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e4

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Type

Buffer, ReDriver

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

377mW

Voltage - Supply

3V~3.6V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

3.3V

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Base Part Number

65LVDS100

Output

LVDS

Pin Count

a count of all of the component leads (or pins)

8

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

3.3V

Operating Supply Current

30mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

25mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

377mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

12μA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

800 ps

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

800 ps

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

454mV

Logic Function

Translator

Number of Inputs

2

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

220ps

Input

CML, LVDS, LVPECL

Driver Number of Bits

1

Max Input Current

66μA

Receiver Number of Bits

1

Data Rate (Max)

2Gbps

Supply Voltage1-Nom

3.3V

Delay Time

The amount of time by which the arrival of a signal is retarded after transmission through physical equipment or systems.

470ps

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

85°C

Capacitance - Input

0.6pF

Height

1.07mm

Length

3mm

Width

3mm

Thickness

970μm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free