Texas Instruments LM5106MM/NOPB

Lifecycle Status

ACTIVE (Last Updated: 4 days ago)

Factory Lead Time

6 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Number of Pins

10

Driver Configuration

Half-Bridge

Logic voltage-VIL, VIH

0.8V 2.2V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

10

Termination

SMD/SMT

ECCN Code

EAR99

Terminal Finish

Matte Tin (Sn)

Voltage - Supply

8V~14V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

12V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Base Part Number

LM5106

Pin Count

a count of all of the component leads (or pins)

10

Number of Outputs

2

Output Voltage

18.3V

Max Output Current

The maximum current that can be supplied to the load.

1.8A

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2.1mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1.8A

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

690 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

340μA

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

690 ns

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

100V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

15ns

Fall Time (Typ)

10 ns

Rise / Fall Time (Typ)

15ns 10ns

Channel Type

Synchronous

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

0.69 µs

Output Peak Current Limit-Nom

1.8A

Gate Type

N-Channel MOSFET

Current - Peak Output (Source, Sink)

1.2A 1.8A

High Side Driver

YES

Turn Off Time

0.056 µs

High Side Voltage - Max (Bootstrap)

118V

Height

1.07mm

Length

3mm

Width

3mm

Thickness

1.02mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free