Texas Instruments LM393ADR

Lifecycle Status

ACTIVE (Last Updated: 2 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Weight

72.603129mg

Number of Elements

2

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~70°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Type

Differential

Terminal Finish

Matte Tin (Sn)

Packing Method

TR

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

5V

Base Part Number

LM393

Pin Count

a count of all of the component leads (or pins)

8

Output Type

CMOS, MOS, Open-Drain, TTL

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

5/30V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

600μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

20mA

Max Supply Current

500μA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

2.5mA

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

1.3 μs

Voltage - Supply, Single/Dual (±)

2V~36V ±1V~18V

Output Current per Channel

6mA

Input Offset Voltage (Vos)

1mV

Voltage Gain

106.02dB

Average Bias Current-Max (IIB)

0.05μA

Supply Voltage Limit-Max

36V

Max Input Current

250nA

Input Bias Current

-25nA

Max Junction Temperature (Tj)

150°C

Voltage - Input Offset (Max)

2mV @ 30V

Current - Input Bias (Max)

0.25μA @ 5V

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

70°C

Height

1.75mm

Length

4.9mm

Width

3.91mm

Thickness

1.58mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free