Texas Instruments LM3876T

Mount

Through Hole

Package / Case

TO-220

Number of Pins

11

Weight

9.071847g

Power Dissipation (Max)

125W

JESD-609 Code

e0

Pbfree Code

no

Moisture Sensitivity Level (MSL)

1 (Unlimited)

ECCN Code

EAR99

Terminal Finish

Tin/Lead (Sn/Pb)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-20°C

Terminal Position

ZIG-ZAG

Number of Functions

1

Pin Count

a count of all of the component leads (or pins)

3

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

OTHER

Number of Channels

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

84V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

24V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

125W

Current - Output

4A

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

70mA

Output Power

That power available at a specified output of a device under specified conditions of operation.

56W

Common Mode Rejection Ratio

80 dB

Current - Input Bias

1μA

Supply Type

Dual, Single

Input Offset Voltage (Vos)

15mV

Bandwidth

20 kHz

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

8MHz

Voltage Gain

120dB

Power Supply Rejection Ratio (PSRR)

120dB

Gain

8 dB

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

42V

Min Dual Supply Voltage

12V

Dual Supply Voltage

28V

Power - Output

56W

Consumer IC Type

AUDIO AMPLIFIER

Number of Amplifiers

1

Load Impedance

8Ohm

Height

12.7mm

Length

25.4mm

Width

38.1mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant