Texas Instruments CD4066BE

Lifecycle Status

ACTIVE (Last Updated: 1 day ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

14-DIP (0.300, 7.62mm)

Number of Pins

14

Weight

927.99329mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

30 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

4000B

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

14

ECCN Code

EAR99

Type

Bilateral, FET Switches

Resistance

240Ohm

Terminal Finish

Matte Tin (Sn)

Voltage - Supply

3V~18V

Number of Functions

4

Supply Voltage

5V

Frequency

40MHz

Base Part Number

CD4066

Pin Count

a count of all of the component leads (or pins)

14

Number of Outputs

2

Circuit

1 x 1:1

Polarity

Non-Inverting

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

5/15V

Number of Channels

4

Max Supply Current

5μA

Throw Configuration

SPST

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

20nA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

30 ns

Number of Inputs

3

Supply Type

Dual, Single

Bandwidth

40MHz

Neg Supply Voltage-Nom (Vsup)

-5V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

9V

Min Dual Supply Voltage

1.5V

Dual Supply Voltage

7.5V

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

8pF

Voltage Supply Source

A voltage source is a two-terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. However, a real-world voltage source cannot supply unlimited current. A voltage source is the dual of a current source.

Dual Supply

On-state Resistance Match-Nom

15Ohm

Switching

BREAK-BEFORE-MAKE

Switch-on Time-Max

70ns

Switch-off Time-Max

70ns

Drain to Source Resistance

470Ohm

Normal Position

NO

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

125°C

Height

5.08mm

Length

19.3mm

Width

6.35mm

Thickness

3.9mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free