Texas Instruments CD4053BPWRE4

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

16-TSSOP (0.173, 4.40mm Width)

Number of Pins

16

Weight

61.887009mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

450 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~125°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

Resistance

240Ohm

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

3

Supply Voltage

5V

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Base Part Number

CD4053

Pin Count

a count of all of the component leads (or pins)

16

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

18V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

5/15V

Number of Channels

2

Number of Circuits

3

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

20V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

3V

Analog IC - Other Type

SINGLE-ENDED MULTIPLEXER

Operating Supply Current

80nA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

100μA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

20 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

720 ns

Logic Function

Demultiplexer, Multiplexer

Number of Inputs

6

Voltage - Supply, Single/Dual (±)

3V~20V ±2.5V~9V

Supply Type

Dual, Single

Bandwidth

30MHz

Neg Supply Voltage-Nom (Vsup)

-5V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

9V

On-State Resistance (Max)

240Ohm

Min Dual Supply Voltage

2.5V

Multiplexer/Demultiplexer Circuit

2:1

Off-state Isolation-Nom

40 dB

Current - Leakage (IS(off)) (Max)

100nA

Channel Capacitance (CS(off), CD(off))

0.2pF 9pF

On-state Resistance Match-Nom

15Ohm

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPDT

Channel-to-Channel Matching (ΔRon)

5 Ω

Switching

BREAK-BEFORE-MAKE

Signal Current-Max

0.01A

Length

5mm

Height Seated (Max)

1.2mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead