Texas Instruments CD4048BE

Lifecycle Status

ACTIVE (Last Updated: 3 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

16-DIP (0.300, 7.62mm)

Number of Pins

16

Weight

951.693491mg

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

4000B

JESD-609 Code

e4

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

Termination

Through Hole

ECCN Code

EAR99

Voltage - Supply

3V~18V

Terminal Position

DUAL

Number of Functions

1

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Base Part Number

CD4048

Pin Count

a count of all of the component leads (or pins)

16

Output Type

Single-Ended

Max Output Current

The maximum current that can be supplied to the load.

6.8mA

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Supply Voltage-Min (Vsup)

3V

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

50pF

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

500mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

6.8mA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

300 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

5μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

240 ns

Logic Function

Multi Function

Number of Inputs

8

Output Characteristics

3-STATE

Logic Type

Multifunction Expandable

Output Polarity

TRUE

Number of Gates

The number of gates per IC varies depending on the number of inputs per gate. Two?input gates are common, but if only a single input is required, such as in the 744 NOT(or inverter) gates, a 14 pin IC can accommodate 6 (or Hex) gates.

1

Prop. Delay@Nom-Sup

600 ns

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

5pF

Schmitt Trigger Input

The Schmitt Trigger is a logic input type that provides hysteresis or two different threshold voltage levels for rising and falling edge.

No

Height

5.08mm

Length

19.3mm

Width

6.35mm

Thickness

3.9mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free