Texas Instruments 5962-8949403PA

Package / Case

CDIP

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Number of Pins

8

Operating Temperature (Max.)

125°C

Operating Temperature (Min.)

-55°C

Pbfree Code

no

Number of Terminations

8

ECCN Code

EAR99

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

THROUGH-HOLE

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

2

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Reach Compliance Code

not_compliant

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Pin Count

a count of all of the component leads (or pins)

8

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

4/16V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

MILITARY

Slew Rate

the maximum rate of output voltage change per unit time.

0.04 V/us

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio

94 dB

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

85 kHz

Unity Gain BW-Nom

85 kHz

Average Bias Current-Max (IIB)

0.00006μA

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Low-Bias

YES

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

NO

Bias Current-Max (IIB) @25C

0.00015μA

Programmable Power

A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

NO

Input Offset Voltage-Max

12000μV

Wideband

NO

Power

NO

Voltage Gain-Min

25000

Slew Rate-Min

0.01 V/us

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant

Lead Free

Contains Lead