J01441A0002

Telegartner Inc J01441A0002

Part No:

J01441A0002

Manufacturer:

Telegartner Inc

Datasheet:

-

Package:

-

AINNX NO:

28154004-J01441A0002

Description:

4.3-10 BULKHEAD JACK

Products specifications
  • Mounting Type
    Panel Mount
  • Contact Plating

    Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

    Cu2Ag5
  • Mounting Feature

    a process by which the operating system makes files and directories on a storage device (such as hard drive, CD-ROM, or network share) available for users to access via the computer's file system.

    Bulkhead - Front Side Nut
  • Dielectric Material

    a substance that is a poor conductor of electricity, but an efficient supporter of electrostatic field s.

    Polytetrafluoroethylene (PTFE)
  • Body Material
    Brass
  • Center Contact Plating
    Silver
  • Center Contact Material
    Copper Alloy
  • Mfr
    Telegartner Inc
  • Package
    Bag
  • Product Status
    Active
  • Frequency-Max
    6 GHz
  • Base Product Number
    J01441A0
  • Manufacturer part #
    J01441A0002
  • Content
    1pc(s)
  • Cable category
    RG 58
  • Body Orientation
    Straight
  • Termination Method
    Crimp
  • Manufacturer Part Number
    J01441A0002
  • Manufacturer
    Telegartner Karl Gartner GmbH
  • Part Life Cycle Code
    Contact Manufacturer
  • Ihs Manufacturer
    TELEGARTNER KARL GARTNER GMBH
  • Risk Rank
    5.73
  • Series
    -
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -55°C ~ 90°C
  • ECCN Code
    EAR99
  • Connector Type
    Jack, Female Socket
  • Type
    J01441A0002
  • Gender
    Female
  • HTS Code

    HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

    8536.69.40.10
  • Fastening Type

    There are 5 Main Types of Fastening Type: Screws, Nails, Bolts, Anchors, Rivets.

    Threaded
  • Ingress Protection

    Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

    IP67 - Dust Tight, Waterproof
  • Reach Compliance Code
    compliant
  • Operating Frequency

    Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

    6GHz
  • Housing Color
    Silver
  • Impedance

    In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

    50Ohm
  • Connector Style
    4.3/10
  • Number of Ports

    A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

    1
  • Mating Cycles

    to the number of a times a physical connector can “mate” or connect to it's counterpart.

    100
  • Contact Termination
    Solder
  • Size
    Standard
  • Includes
    -
  • Insertion Loss

    the loss of signal power resulting from the insertion of a device in a transmission line or optical fiber and is usually expressed in decibels (dB).

    -
  • Body Finish

    Body Finish Paint is a very high-quality and fast drying 1-component acrylic lacquer, specially developed to spray new or repaired sheet metal as well as parts of machines giving them an OEM finish.

    Silver
  • Cable Group

    A cable group describes the group of cables that are compatible with a particular contact.

    -
  • Shield Termination
    Solder
  • Features
    -
0 Similar Products Remaining