TE Connectivity / Citec 5350500106

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Terminal Shape

FLAT

Mounting Feature

a process by which the operating system makes files and directories on a storage device (such as hard drive, CD-ROM, or network share) available for users to access via the computer's file system.

THROUGH HOLE MOUNT

Number of Terminals

3

Product Depth (mm)

9.6(mm)

Operating Temp Range

-25C to 70C

Positions of Adjustment

SIDE

Number of Elements

1

Tolerance (+ or -)

20%

Rad Hardened

No

Package Description

,

Rohs Code

Yes

Manufacturer Part Number

5350500106

Package Shape

RECTANGULAR PACKAGE

Manufacturer

TE Connectivity

Part Life Cycle Code

Contact Manufacturer

Ihs Manufacturer

TE CONNECTIVITY LTD

Risk Rank

5.68

Tolerance

20%

Pbfree Code

Yes

ECCN Code

EAR99

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±500(ppm/°C)

Type

Potentiometer

Resistance

4700(ohm)

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8533.40.80.70

Power Rating

0.2 (1/5)(W)

Technology

Carbon Film

Resistor Type

POTENTIOMETER

Military Standard

Not Required

Termination Style

Pin

Rated Power Dissipation (P)

0.2 W

Actuator Type

THUMB WHEEL

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

Not Required

Number of Turns

1

Actuator Orientation

A valve actuator is the mechanism for opening and closing a valve. Manually operated valves require someone in attendance to adjust them using a direct or geared mechanism attached to the valve stem. Power-operated actuators, using gas pressure, hydraulic pressure or electricity, allow a valve to be adjusted remotely, or allow rapid operation of large valves. Power-operated valve actuators may be the final elements of an automatic control loop which automatically regulates some flow, level or other process. Actuators may be only to open and close the valve, or may allow intermediate positioning; some valve actuators include switches or other ways to remotely indicate the position of the valve.

HORIZONTAL

Ganging Number

1

Resistance Law

LINEAR

Bushing Type

NOT REQUIRED

Product Length (mm)

13.55(mm)