SAJSX2XPP0180SDTSEQ

TE Connectivity SAJSX2XPP0180SDTSEQ

Part No:

SAJSX2XPP0180SDTSEQ

Manufacturer:

TE Connectivity

Datasheet:

-

Package:

-

AINNX NO:

40510167-SAJSX2XPP0180SDTSEQ

Description:

Switch Snap-Action SPDT N.O/N.C Pin Plunger 2A 250V 1.8N Through Hole

Products specifications
  • Mounting Type
    Chassis Mount
  • Package
    Bulk
  • Base Product Number
    SAJSX2
  • Mfr
    TE Connectivity ALCOSWITCH Switches
  • Product Status
    Active
  • Voltage Rating DC

    The DC Voltage ratings are the AC voltage values times 1.41 (usually rounded).

    30 V
  • ElectricalLife
    50,000 Cycles
  • Voltage Rating AC

    In general the AC voltage assumes a 50-60 Hz sinusoidal waveform and is the RMS (root mean squared) value.

    250 V
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 85°C
  • Series
    SAJS
  • Current Rating (Amps)
    2A (AC/DC)
  • Ingress Protection

    Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

    IP67 - Dust Tight, Waterproof
  • Termination Style
    Solder Lug
  • Actuator Type
    Round (Pin Plunger)
  • Circuit
    SPDT
  • Switch Function

    This function will evaluate a given expression (or a value) against a list of values and will return a result corresponding to the first matching value. In case there is no matching value, an optional default value will be returned.

    On-Mom
  • Mechanical Life
    1,000,000 Cycles
  • Operating Force
    183gf
  • Overtravel
    0.015 (0.4mm)
  • Differential Travel

    The distance between the operating position and release or reset position of a limit switch actuator.

    0.006 (0.15mm)
  • Pretravel
    0.024 (0.6mm)
  • Operating Position
    0.330 (8.4mm)
  • Release Force

    The value to which the actuating force must be reduced in order to permit the switch to return to its normal position after operation.

    20gf
  • Features
    -
0 Similar Products Remaining