TE Connectivity OMIH-SS-105LM，300

Package / Case

Axial

Mounting Type

Through Hole

Supplier Device Package

Axial

Contact Materials

Silver Tin Oxide (AgSnO)

Turn Off Voltage (Min)

0.25 VDC

Turn On Voltage (Max)

3.75 VDC

CoilResistance

48.5 Ohms

Package

Bulk

Base Product Number

OMIH

Mfr

TE Connectivity Potter & Brumfield Relays

Product Status

Obsolete

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 175°C

Series

CMF

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Size / Dimension

0.090 Dia x 0.240 L (2.29mm x 6.10mm)

Tolerance

±0.1%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±25ppm/°C

Resistance

348 kOhms

Composition

Metal Film

Power (Watts)

0.5W, 1/2W

Termination Style

PC Pin

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

--

Contact Current Rating

The current rating of a contact is defined as the current level that creates a certain temperature rise of the contact spring — usually 20°C or 30°C. Both electrical and thermal factors govern the heat created by the current.

16 A

Contact Termination

Solder Pin

Contact Form

A page on a website that allows users to communicate with the site owner. The page has fields for filling in name, address and type of comment. On most company websites, email and mailing addresses are also included; however, the contact form provides an immediate, convenient way for users to ask the company questions.

SPST-NO (1 Form A)

Relay Type

General Purpose

Operate Time

The time interval between the instant of the occurrence of a specified input condition to a system and the instant of completion of a specified operation.

20ms

Coil Voltage

5VDC

Coil Type

There are 2 different types of 'coil'; one has copper on it (IUD) and the other contains hormone (Mirena IUS). Both are over 99% effective at protecting against pregnancy.

Non Latching

Switching Voltage

The maximum switching voltage of a relay is the maximum voltage that can be across the contacts whether the relay is open or closed. Operating a relay with high voltages present can cause arcing, and this in turn erodes the contacts and eventually degrades contact performance.

250VAC, 30VDC - Max

Coil Current

A current coil is basically a coil, such as, a wire wrapped around an electrical conductor.

108mA

Release Time

In telecommunication, release time is the time interval for a circuit to respond when an enabling signal is discontinued

8ms

Must Operate Voltage

3.75 VDC

Contact Rating (Current)

16A

Coil Power

540 mW

Must Release Voltage

0.25 VDC

Seal Rating

Sealed - Flux Protection

Coil Insulation

-

Product

Power Relays

Features

Flame Retardant Coating, Moisture Resistant, Safety

Height Seated (Max)

--