NB-PTCO-168

TE Connectivity NB-PTCO-168

Part No:

NB-PTCO-168

Manufacturer:

TE Connectivity

Datasheet:

-

Package:

2-SIP

AINNX NO:

35005224-NB-PTCO-168

Description:

Temp Sensor Analog 2-Pin SIP Blister Box

Products specifications
  • Mounting Type
    Through Hole
  • Package / Case
    2-SIP
  • RTD Material
    Platinum
  • Supplier Package
    SIP
  • Mounting
    Through Hole
  • Package
    Bulk
  • Base Product Number
    NB-PTCO
  • Mfr
    TE Connectivity Measurement Specialties
  • Product Status
    Active
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -30 to 300 °C
  • Series
    --
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Bulk
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Termination
    PC Pins
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    ±3850ppm/°C
  • Resistance
    1kohm
  • Pin Count

    a count of all of the component leads (or pins)

    2
  • Termination Type
    Solder
  • Operating Supply Current
    500 uA
  • Current
    500µA
  • Accuracy
    ±0.15%
  • Response Time

    the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

    0.35 (Water) s, 17 (Air) s
  • Sensor Type
    PT1000
  • Resistance Tolerance

    Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

    ±0.15%
  • Product
    Temperature Sensors
  • Probe Length
    5mm
  • Resistance @ 0°C
    1 kOhms
0 Similar Products Remaining