TE Connectivity 8-6609928-0

Mounting Type

Surface Mount

Package / Case

HC-49/US

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Approvals

CSA, UL, VDE

Current-UL

3A

Voltage-IEC

120VAC

Voltage-UL

250VAC

Current-IEC

3A

Base Product Number

6609928

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C

Series

SXTHM2

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Size / Dimension

0.524 L x 0.197 W (13.30mm x 5.00mm)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Termination

Quick Connect - 0.187 (4.7mm)

Connector Type

Receptacle, Male Blades - Module

Type

MHz Crystal

Number of Positions

3

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

--

Frequency

27 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±30ppm

Approval Agency

CSA, UL, VDE

ESR (Equivalent Series Resistance)

30 Ohms

Panel Cutout Dimensions

--

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

18pF

Connector Style

IEC 320-C14

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±10ppm

Filter Type

Filtered (EMI, RFI) - Commercial

Accomodates a Fuse

Yes (Fuse Not Included)

Fuse

Yes

Fuse Holder, Drawer

A fuse holder is a type of fuse accessory that is required to integrate fuses that cannot be dropped directly into conductive paths due to their shape and size.

Fuse Holder, Twin Fused

Switch Features

Switch On-Off

Features

Voltage Selector

Height Seated (Max)

0.177 (4.50mm)

Panel Thickness

0.031 ~ 0.114 (0.79mm ~ 2.90mm)

Material Flammability Rating

--