TE Connectivity 409VA201M

Mounting Type

Through Hole

Resistive Material

The resistive material is a combination of a Ceramic material and a Metal, and therefore these resistors are also referred to as Cermet. Just as with carbon film, the resistance value is adjusted by cutting a spiral pattern in the film. This can be done with an abrasive or a laser.

Cermet

Lead Free Status / RoHS Status

--

Package

Bulk

Mfr

TE Connectivity Passive Product

Product Status

Obsolete

Series

409, Citec

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Size / Dimension

Rectangular - 0.500 x 0.346 Face x 0.500 H (12.70mm x 8.80mm x 12.70mm)

Tolerance

±20%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

--

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

100 ppm/°C

Resistance

100 Ohm

Power (Watts)

0.5W, 1/2W

Power Rating

0.05 W

Resistor Type

High Reliability

Termination Style

PC Pins

Adjustment Type

Side Adjustment

Number of Turns

1

Resistance Tolerance

Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

2