TE Connectivity 409HS102M

Part No:

409HS102M

Manufacturer:

TE Connectivity

Datasheet:

Package:

AINNX NO:

36924250-409HS102M

Category:

Trimmer Potentiometers

Description:

Resistor Trimmer, Cermet, 1 kOhm, ± 20%, 500 mW, 1 Turn, Single Turn, Through Hole

Products specifications

Mounting Type
Through Hole
Resistive Material
The resistive material is a combination of a Ceramic material and a Metal, and therefore these resistors are also referred to as Cermet. Just as with carbon film, the resistance value is adjusted by cutting a spiral pattern in the film. This can be done with an abrasive or a laser.
Cermet
Rad Hardened
No
Tolerance (+ or -)
20%
Number of Elements
1
Mounting Styles
Through Hole
Product Diameter (mm)
Not Required(mm)
Positions of Adjustment
TOP
Switch Option
NO
Operating Temp Range
-25C to 100C
Product Depth (mm)
11.5(mm)
Lead Free Status / RoHS Status
--
Package
Bulk
Base Product Number
409H
Mfr
TE Connectivity Passive Product
Product Status
Obsolete
Series
409, Citec
Packaging
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Bulk
Size / Dimension
Rectangular - 0.453 x 0.346 Face x 0.244 H (11.50mm x 8.80mm x 6.20mm)
Tolerance
±20%
Part Status
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
Active
Moisture Sensitivity Level (MSL)
--
Temperature Coefficient
The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.
250 ppm/°C
Type
Trimmer
Resistance
1000(ohm)
Power (Watts)
0.5W, 1/2W
Power Rating
0.5 W
Technology
Cermet
Military Standard
Not Required
Termination Style
Pin
Failure Rate
the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.
Not Required
Adjustment Type
Top Finger Adjust
Number of Turns
1
Resistance Tolerance
Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.
20
Bushing Type
NOT REQUIRED
Product Length
9
Product Width
11 mm
Product Length (mm)
8.8(mm)
Product Height (mm)
6.2(mm)

0 Similar Products Remaining