TE Connectivity 4000-01C02BB999

Package / Case

0805 (2012 Metric)

Mounting Type

Chassis Mount

Supplier Device Package

0805

Weight

0.881 lb (399.61g)

Package

Tape & Reel (TR)

Mfr

Kamaya Inc.

Product Status

Active

Secondary Configuration

Single

Product Depth (mm)

41.28(mm)

Mounting Styles

Flange

Primary Configuration

Single

Base Product Number

4000

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

RMC

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Size / Dimension

0.079 L x 0.049 W (2.00mm x 1.25mm)

Tolerance

±1%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±100ppm/°C

Type

Laminated Core

Resistance

715 Ohms

Composition

Thick Film

Power (Watts)

0.125W, 1/8W

Pin Count

a count of all of the component leads (or pins)

5

Termination Style

Solder, Quick Connect

Voltage - Isolation

--

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

-

Current - Output (Max)

--

Lead Style

Quick Connect

Power - Max

20 VA

Transformer Type

A variety of types of electrical transformer are made for different purposes. Despite their design differences, the various types employ the same basic principle as discovered in 1831 by Michael Faraday, and share several key functional parts.

CLASS 2 TRANSFORMER

Voltage - Primary

120V

Primary Winding(s)

Single

Center Tap

In electronics, a center tap (CT) is a contact made to a point halfway along a winding of a transformer or inductor, or along the element of a resistor or a potentiometer.

No

Voltage - Secondary (Full Load)

24V

Secondary Winding(s)

Single

Features

-

Product Length (mm)

82.6(mm)

Height Seated (Max)

0.026 (0.65mm)

Product Height (mm)

48.54(mm)

Ratings

-