TE Connectivity 27ESA103MMF50N

Mounting Type

Panel Mount

Resistive Material

The resistive material is a combination of a Ceramic material and a Metal, and therefore these resistors are also referred to as Cermet. Just as with carbon film, the resistance value is adjusted by cutting a spiral pattern in the film. This can be done with an abrasive or a laser.

Carbon

Product Depth (mm)

20.4(mm)

Operating Temp Range

-25C to 70C

Switch Option

NO

Positions of Adjustment

SIDE

Product Diameter (mm)

Not Required(mm)

Mounting Styles

Panel

Number of Elements

2

Shaft Diameter (mm)

6.35(mm)

Tolerance (+ or -)

20%

Rad Hardened

No

Lead Free Status / RoHS Status

--

Bushing Size

3/8 in x 8 mm

Voltage, Rating

500 VAC/DC

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+ 70 C

Unit Weight

0.529109 oz

Minimum Operating Temperature

- 25 C

Factory Pack QuantityFactory Pack Quantity

100

Shaft Type

Flatted / D

Part # Aliases

1624176-1

Manufacturer

TE Connectivity

Brand

TE Connectivity / Holsworthy

Number of Detents

Without Detent

RoHS

Details

Package

Bulk

Mfr

TE Connectivity Passive Product

Product Status

Active

Series

23, Citec

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Tolerance

±20%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

--

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

5%

Type

Potentiometer

Resistance

10000(ohm)

Power (Watts)

0.4W

Subcategory

Potentiometers, Trimmers & Rheostats

Power Rating

0.4 mW

Technology

Carbon Film

Orientation

-

Military Standard

Not Required

Termination Style

EYELET

Actuator Type

Flatted

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

Not Required

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

No Switch

Bushing Thread

a fastener element that is inserted into an object

3/8

Adjustment Type

Flatted

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

Potentiometers

Number of Turns

1

Taper

Linear

Built in Switch

None

Resistance Tolerance

Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

20

Actuator Diameter

0.250 (6.35mm)

Rotation

300°

Size - Body

Rectangular - 0.992 x 0.803 Face (25.20mm x 20.40mm)

Number of Gangs

2

Resistance (Ohms)

10k

Element Type

describes a class of elements, including their properties and applicable actions.

Carbon

Product

Potentiometers

Bushing Type

STANDARD

Features

-

Product Category

a particular group of related products.

Potentiometers

Shaft Diameter

6.35 mm

Product Length

70.9 mm

Product Width

20.4 mm

Product Length (mm)

70.9(mm)

Diameter

19 mm

Actuator Length

1.969 (50.00mm)

Product Height (mm)

25.2(mm)