TE Connectivity 2040002-1

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Number of Terminals

5

Qualification

AEC-Q200

Body Orientation

Right Angle

Termination Method

Solder

Base/Housing Material

Thermoplastic

Contact Materials

Copper Alloy

Mounting

Surface Mount

Unit Weight

0.008430 oz

Factory Pack QuantityFactory Pack Quantity

1000

Manufacturer

TE Connectivity

Brand

TE Connectivity

RoHS

Details

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30 to 85 °C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape and Reel

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

100 ppm/K

Type

USB Type B

Resistance

255 kOhm

Gender

Receptacle

Subcategory

USB Connectors

Power Rating

0.125 W

Pitch

0.6500 mm

Orientation

Right Angle

Resistor Type

General Purpose

Pin Count

a count of all of the component leads (or pins)

5

Termination Style

Solder

Number of Contacts

5 POS

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

1

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

USB Connectors

Resistance Tolerance

Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

1

Product

Micro USB Type B Connectors

Mounting Angle

Right Angle

Standard

USB

Product Category

a particular group of related products.

USB Connectors

Product Length

2 mm

Product Width

1.25 mm

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

-