TE Connectivity 1-1337463-0

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Silver

Body Material

Brass

Qualification

AEC-Q200

Voltage, Rating

200 V

Body Orientation

Straight

Product Depth (mm)

Not Required(mm)

Operating Temp Range

-65C to 165C

Product Diameter (mm)

14.5(mm)

Contact Materials

Brass

Rad Hardened

No

Unit Weight

0.352740 oz

Factory Pack QuantityFactory Pack Quantity

1

Manufacturer

TE Connectivity

Brand

TE Connectivity

RoHS

Details

Interface Type

BNC

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-65 to 165 °C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tray

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

100 ppm/K

Connector Type

BNC Coaxial

Type

Terminator

Resistance

280

Gender

PL

Subcategory

RF Interconnects

Power Rating

0.25 W

Resistor Type

General Purpose

Operating Frequency

Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

0 → 1GHz

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

50(ohm)

Body Plating

Silver

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

RF Terminators

Resistance Tolerance

Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

1

Product Category

a particular group of related products.

RF Terminators

Product Length

3.2 mm

Product Width

1.6 mm

RF Series

The rate of oscillation of electromagnetic radio waves in the range of 3 kHz to 3 GHz, as well as the alternating currents carrying the radio signals.

BNC

Product Length (mm)

22.5(mm)

Product Height (mm)

Not Required(mm)