TDK-Epcos B44066R6012E230

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Unit Weight

2.316 lbs

Factory Pack QuantityFactory Pack Quantity

1

Part # Aliases

B44066R6012E230Z 1

Manufacturer

EPCOS / TDK

Brand

EPCOS / TDK

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-20°C ~ 70°C

Series

SXT324

Size / Dimension

0.126 L x 0.098 W (3.20mm x 2.50mm)

Type

MHz Crystal

Subcategory

PMIC - Power Management ICs

Voltage - Supply

110 ~ 230VAC

Frequency

12 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±25ppm

Output Type

Relay

ESR (Equivalent Series Resistance)

100 Ohms

Circuit

-

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

10pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±25ppm

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

PFC - Power Factor Correction

Contact Rating @ Voltage

6A @ 250VAC

Delay Time

The amount of time by which the arrival of a signal is retarded after transmission through physical equipment or systems.

1 Sec ~ 20 Min

Trip Range

The maximum distance a piezo stage can move in a single axis.

30 ~ 525VAC

Trip Status

-

Product Category

a particular group of related products.

Power Factor Correction - PFC

Height Seated (Max)

0.031 (0.80mm)