TDK ZUP60-14/U

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Lead, Tin

Mount

Through Hole

RoHS

Non-Compliant

Input Frequency

The Input Frequency refers to the frequency that mobiles and portables transmit on to access a Repeater.

47 to 63 Hz

Minimum Isolation Voltage

3000 Vdc

Mounting

Rack Mount

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0 to 50 °C

Tolerance

0.1 %

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

50 ppm/°C

Type

Regulated

Resistance

19.1 kΩ

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

175 °C

Min Operating Temperature

-65 °C

Composition

Metal Film

Military Standard

MIL-PRF-55182

Number of Outputs

1

Output Voltage

0 to 60 V

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

14 A

Input Voltage

85 to 265 V

Length

7.62 mm

Diameter

2.39 mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No