DPX4048WS15

TDK DPX4048WS15

Part No:

DPX4048WS15

Manufacturer:

TDK

Datasheet:

-

Package:

0805 (2012 Metric)

AINNX NO:

38659541-DPX4048WS15

Description:

Module DC-DC 1-OUT 15V 2.67A 40W 8-Pin

Products specifications
  • Package / Case
    0805 (2012 Metric)
  • Supplier Device Package
    0805
  • Package
    Tape & Reel (TR)
  • Base Product Number
    RS73G2ART
  • Mfr
    KOA Speer Electronics, Inc.
  • Product Status
    Active
  • Switching Regulator
    Yes
  • Mounting
    DIN Rail
  • Manufacturer Part Number
    DPX4048WS15
  • Manufacturer
    TDK-Lambda Corporation
  • Part Life Cycle Code
    Active
  • Ihs Manufacturer
    TDK-LAMBDA CORP
  • Risk Rank
    5.31
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -55°C ~ 155°C
  • Series
    RS73-RT
  • Size / Dimension
    0.079 L x 0.049 W (2.00mm x 1.25mm)
  • Tolerance
    ±0.5%
  • Pbfree Code
    Yes
  • Number of Terminations
    2
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    ±50ppm/°C
  • Type
    Step Down
  • Resistance
    19.1 Ohms
  • Composition
    Thick Film
  • Power (Watts)
    0.25W, 1/4W
  • Reach Compliance Code
    compliant
  • Pin Count

    a count of all of the component leads (or pins)

    8
  • Number of Outputs
    1
  • Output Voltage
    15 V
  • Failure Rate

    the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

    -
  • Analog IC - Other Type
    DC-DC REGULATED POWER SUPPLY MODULE
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    2.67 A
  • Output Power

    That power available at a specified output of a device under specified conditions of operation.

    40 W
  • Features
    Automotive AEC-Q200
  • Input Voltage
    48 V
  • Height Seated (Max)
    0.023 (0.60mm)
  • Ratings
    AEC-Q200
0 Similar Products Remaining